Many factors contribute to the overall performance of manufacturing facilities and other industrial areas. The fluid handling system throughout the structure — the pipe that runs along the walls, ceiling, and sometimes underground to supply the facility with water, oil, and other fluids that are required to complete particular operations — is one of those components.

The pipe and fittings used in your fluid handling activities will ultimately need to be changed, just like any other system. If you’re constructing a new facility, you’ll have the opportunity to start from the ground up and select the ideal pipe material for your purposes.

SGP pipe fittings in Malaysia
SGP pipe fittings in Malaysia

When establishing or building a fluid handling system in your factory or warehouse, you’ll need to consider numerous factors such as your industry, the materials handled, and your goal. The sort of pipe material you need to convey your liquids, gases, chemicals, and other fluids is one of the most significant selections you’ll make during this procedure. This is not a decision to be taken lightly; selecting the incorrect pipe material might risk the quality of your product as well as your and your employees’ safety.

The material is in the process of being transported.

What kind of liquid is being transported through your pipes? Is the liquid corrosive or non-corrosive, for example? Crude oil, ammonia, saltwater, and other acidic liquids with a strong chemical composition are examples of corrosive liquids. Corrosion-resistant pipe types, such as plastic CPVC pipe or lined pipe, are required for these liquids. Because most liquids are slightly corrosive, the pipes that will convey it must be made of corrosion-resistant substances. Non-corrosive fluids or gases such as lubricating oil, air, and nitrogen, on the other hand, are safe to carry via carbon steel or metal pipelining.

The Pipe Fluid Handling System’s Service Life

You’ll need dependable and long-lasting plumbing, but how long will your fluid handling system need to last? Asking how long you anticipate your fluid handling system to survive is an important part of good pipe design and material selection. You don’t need to spend on a highly long-lasting pipe material if you know you’ll have to replace the system in five to ten years for another reason, such as relocation. This may have an impact on the amount of money you’re prepared to spend on the system, which will influence the sort of material you should choose.

You must examine various criteria regarding your facility and fluid handling system when determining the optimal pipe material for fluid handling activities. Every production facility is different, and different uses necessitate different pipe materials and fittings. When it’s time to upgrade your fluid handling system, think about each option thoroughly rather than just doing what everyone else is doing.

However, lined pipe material, which combines the greatest attributes of the two most common small-scale options — plastic and metal — is frequently the best answer for most average-sized production operations. If you seek SGP fittings in Malaysia please visit Unitrade for more.